Plumbing Emergency Service for Stoke-on-Trent and Staffordshire

Plumbing problems can occur day or night at the most inconvenient of times and need to be dealt with promptly.  Your Local Plumber in Stoke-on-Trent offers a 24 hour emergency plumbing service and aims to be with you within 60 minutes of your call to us.

download (1)
download (2)

Emergency Plumber Rate £90 per hour after 7pm and weekends - All Major Credit Cards Accepted.


Do you know how to turn off your water supply?

Inside Stop Valve (this is the point where the water supply enters the property)

In most instances the internal water supply can be stopped by turning off the inside Stop Valve (often referred to as Stop Cock).  This can usually be located under the kitchen sink and can be closed by turning it clockwise.


Individual Appliances

Some water using appliances such as toilets, taps and washing machines to name a few have their own shut off valves, which will allow you to effectively isolate the water flowing to that particular device.  The picture to the right shows a separate shut off valve to a washing machine. By turning the valve 90° clockwise this will shut off the water supply to this individual appliance.

Gravity fed water systems

If you have a gravity feed water supply system, which is made up of a water tank (usually located in the loft or high up in the property) and a hot water cylinder, even with the main water supply turned off it will continue supplying water to hot taps and sometimes to the cold taps and toilet in the bathroom.  In most cases the water tank in the loft should have it's own shut off valve, by turning this off you will prevent it from emptying further.

Send A Message to Stoke Plumbers

Please enter your name.
Please enter a message.

Find a Plumber in Stoke-on-Trent...

Stoke-on-Trent Plumber



7 King Charles Close

Meir Park



01782 703082

rumansy speed dating

The term "plumber" dates in the Roman Empire.  [3] The Latin to get direct is plumbum.  Roman roofs used cause conduits and drain pipes[4] and a few were coated with lead, guide was also employed for piping and for creating bathrooms.  [5] In medieval times anybody who worked with direct was known as a plumber because may be found by an infusion of workmen repairing a roof at Westminster Palace and have been known as pipes "To Gilbert de Westminster, plumber, working around the roofing of the pantry of this tiny hall, covering it with direct, and about different flaws in the roofing of the tiny hall".  [6] Hence a individual who has experience in working with direct was initially called a Plumbarius that was later shortened to some plumber.

Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.[1]Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications.[2] The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.[3]
In the developed world, plumbing infrastructure is critical to public health and sanitation.[4][5] Boilermakers and pipefitters are not plumbers, although they work with piping as part of their trade, but their work can include some plumbing.
It is a nightmare that many homeowners expect they simply need to dream about and never encounter--a pipe suddenly springs a leak and water begins spraying. Luckily, despite the fact that your first thought is "What on earth do I do today," that there are tons of methods to cope with this circumstance.

The major issue is, do not panic. If you don’t call your emergency plumber. First, turn off the water source to the dripping pipe. This might be in the fixture supply valve facing the flow or in the primary water supply valve itself. Shutting the water off will block the water flow and provide you the time to think. In case the plumber can not get there for a few days or you do not have enough time to fix it yourself, then you truly do have lots of alternatives to get a fast fix before the pipe could be suitably repaired.

First, find out where the flow is really coming from. Can it be a pinhole or even has a pipe divide? When it is a streak of aluminum, below are a few quick fixes--based on which you need available.

Bear in mind, none of them are permanent fixes, but they will permit you to turn back the water on till it is possible to find the pipe repaired more indefinitely.

When it's a tiny enough gap, stick with a pencil line to the pit and split it off, then wrap the tube with electrician's tape. Smear a plumber's epoxy repair putty within the tape to be certain that it doesn't flow.

You may even wrap a sheet of rubber (such as an old inner tube) across the tube above the pit, and then utilize a C-clamp and smaller cubes of wood to clamp the rubber wrap snugly in place. If you've got them, hose clamps across the rubberized covering the pit might also be used to keep water from leaking.

Do not have some old rubber which may work as a fix? Slice the backyard hose lengthwise and place it on the hole in the tube.

These repairs take a bit more time and some preparation, but as soon as you're finished, you have got a permanent repair for the leaky pipe.

These clamps have a rubber gasket attached indefinitely within the clamp, which itself was created to fit round the leaky pipe. Simply set the clamp above the hole and twist the key screws, holding it in position and creating a durable seal.

Another choice is to utilize flexible/braided metallic tube with compression spouses on each end to give a permanent fix. A substantial benefit of this fix is it will permit you to not just resolve a little effluent flow, but it may be used to resolve a much more split pipe. These metallic tubes can be found in several of lengths so that you need to be able to repair your pipe where it is damaged.

To put in the braided metallic tubing, you are likely to need to cut out the damaged section of pipe, so make sure you drain all of the water from your plumbing. Next, center the fix coupling from the broken section of pipe and indicate the water pipe one inch in from each end of the coupling. Cut out the damaged pipe in the marks, then slide the compression couplings onto each end of the water pipe, and then attach the fix coupling. Tighten the compression fittings and then turn the water back on to test for leaks.

Any and all of the above mentioned quick fixes will get you back in business fast should you ever have to take care of a leaky pipe. Anybody residing in a house with aluminum pipes may be grateful that leaky pipes occur very rarely.

In older houses where galvanized pipes have been used for pipes, leaking pipes will regrettably be considerably more common. Since galvanized pipes rust from the interior, you can not tell what sort of condition they're in by looking at them. But when one begins leaking, it is plausible to expect that others will not be far behind. Laying in a fantastic source of pipe clamps may be a sensible investment.

The debut of household pipes and drainage may appear dull, but with clean water piped to a property, and gray sewer and waste removed, is just one of the amazing improvements in human history. We have all lived in a house with a leaking faucet, eternally dribbling toilet cistern, or even worse a burst pipe which has destroyed a ceiling or floor.Even if a flow is relatively minor it may still cause a great deal of damage with time, and of course cost you a great deal of money if you are on a water meter; based on Waterwise merely fixing a leaky faucet could help save you #18 annually.Here are the most typical water escapes you'll find around your house.  A number of these may be handled by a capable DIY’er, but others are going to want the eye of an attorney.A leaking faucet is generally a indication that the washer is wearing out.  This is only one of these home repair tasks which most people can perform, but in the event that you truly don't feel convinced repairing a leaky faucet, then find out a plumber or even great handyman.Before exploring, make sure you switch off the water source.  Your sink or tub might get an isolator valve attached to it (search for a device onto a pipe which has what seems like a slot-head twist inside and turn it till the line runs round the tube), but should not utilize the stopcock to switch off the water.  After that you can open up the faucet and scrutinize the washer prior to replacing it.Repairing a leaking faucetRepairing a leaking sink may be trickier than the usual tap, but it isn't beyond the ability of most folks.  But it may get dirty and it is often tough to reach the issue.  A flow in the water hose.   This type of escape will make a whole lot of mess, typically spraying water all over the area.    If water seems when you allow the faucet run down the drain, or drain a complete sink, then you've got a leak somewhere in the drain line.    It might be that there's a leak at the seal around the plughole of the sink.  The simplest way to work out this is to fill out the sink and then leave it.  If the water level drops or you've got moisture appearing underneath the sink afterward the seal around the pit is not sound.  Repairing a leaking bathtubThis is a frequent issue, and also in upstairs baths a leaking tub can lead to critical damage to ceilings and floors, so be certain that you place it early and get it repaired quickly.  The most Frequent causes of a leaking tub are:  When the seal round the plughole or the flow is broken then the tub can flow when complete.  Caulk across the bathtub failing.   This will often cause a slight problem, although in the event that you've got a shower within your tub it might bring about a great deal of water damage.  If the sealant around the edge of the bathtub and the tiles/wall has awakened afterward moisture can float.    The pipes that feed in the bathtub faucets or shower may well be leaking.  This is sometimes tough to see without removing the side panel of this tub.  If your toilet is upstairs afterward a frequent indication of a water flow is rust and damage to the ceiling of the room beneath.Repairing a leaking bathtubIn case you've got a shower enclosure then there are numerous places where a flow can happen, and the majority of them are somewhat very similar to a bath flow, therefore check the springs, all sealant joints along with some other pipe work.  The issue with leaking pipes may be that they're buried in a wall supporting tiles, so are not easy to get at.  But in case you've got a leak here the harm will be evident by tiles lifting or other indications of harm.  Due to the quantity of water which flows through a shower, it is important to repair a leaking shower when possible.Repairing a leaking bathroomOf All of the escapes you can get at the house a leaking toilet may be the most annoying and unsanitary, and it's also an item that may flow in Plenty of different ways, such as:Crack at the tank or bowl.   These can flow a great deal of water and also will both demand either replacing the bathroom or the section that's affected.    The ballcock and float valve modulates the consumption of water to the cistern following the toilet was flushed.  If that is broken or damaged then the tank will probably last to fill up and may float.    The feed line attracts water to the tank after burning off.  It may become damaged over time, and permit water to continually enter the tank.  Faulty fill valve.   The fill valve regulates the consumption of water in the feed line to the cistern.  If it breaks then it enables water to constantly trickle in the cistern.    When the toilet cistern escape is obstructed and you've got a faulty fill valve or other related dilemma then the tank might well float.  Occasionally a leaking toilet can be mended, other situations the bathroom might have to be replaced completely.  In any event, due to the immense quantities of water a bathroom uses it is crucial that you get the issue sorted as soon as possible.Switch off the water source before calling a plumber or project any repairs yourselfRepairing a leaking radiatorA leaking radiator may often go undetected for sometime but may damage floors, ceilings and wiring.  Normally a leaky radiator is due by:  Frequently brought on by the spindle from the valve wearing out, this kind of leak generally only happens when the valve is partially exposed.  Fixing a valve requires one to drain the machine, replace the valve and then refill the heating system and bleed the radiators.  It is a fiddly task and one best left for your heating or plumbing pro.    On occasion the spindle inside the valve only needs tightening up.  You can accomplish it by removing the valve cap and then tightening the nut over the spindle.  However, if that does not work then the entire spindle will require replacement as previously, so it is likely time to call in a specialist.    This can be a frequent cause of a leaking radiator, and may very often be sorted by simply speeding up the coupling nut.  Do not over tighten the nut since you may strip it or split the joint.  When it does not work then it might well be that the valve itself requires replacing.     Corrosion about the radiator plumbing, particularly in the joints, is a really common issue, since the alloy in the machine is continually subjected to water.  Pipework and even whole radiators may require replacement, so this fix is best managed by a plumber.  These are the most frequent water escapes you'll discover in the house.